Вертикальные фрезерные станки серии STN
Описание
| Article | UNIT | STM 2VA | STM 2VM | |
|---|---|---|---|---|
| Table | Working Surface (L×W) | mm | 1,100×290 | 1,100×290 |
| T-Slots (Width×Number) | mm | 16×3 | 16×3 | |
| Max Travel (Longitudinal) | mm | 820 (O.T) | 820 (O.T) | |
| Max Travel (Cross) | mm | 300 (O.T) | 300 (O.T) | |
| Max Travel (Vertical) | mm | 450 (O.T) | 450 (O.T) | |
| Feeds/min (Longitudinal) | mm/min | 15~720 | 15~720 | |
| Feeds/min (Cross) | mm/min | 15~720 | 15~720 | |
| Rapid Feed/min (Long, Cross) | mm/min | 3,000 | 3,000 | |
| Rapid Feed/min (Vertical) | mm/min | 800 | 800 | |
| Table Load (Max) | kg | 250 | 250 | |
| Spindle | Taper of Spindle Bore | N.T | 50 | 50 |
| Number of Spindle Speeds | step | 9 | 9 | |
| Range of Spindle Speeds | r.p.m | 90~1,400 | 90~1,400 | |
| Quill Power Feeds (1/Rev) | m/rev | 0.03, 0.06, 0.12 | - | |
| Vertical Spindle Travel | mm | 90 | 90 | |
| Head Tilting Angle | Deg | ±45∘ | ±45∘ | |
| Motor | Main Spindle Motor | kw | 3.75(5HP), 4P | 3.7(5HP), 4P |
| Long & Cross Feed Motor | kw | 1.5(2HP), 4P | 1.5(2HP), 4P | |
| Vertical Rapid Motor | kw | 1.1(1.5), 6P | 1.1(1.5), 6P | |
| Coolant Pump Motor | w | 100, 2P | 100, 2P | |
| Floor Space (W×L) | mm | 3,000×2,000 | 3,000×2,000 | |
| Net Weight | kg | 2,300 | 2,300 | |